Yamaha DRAG STAR XVS1100A, Руководство пользователя

Страница: 217 / 407

15. Remove the screw (A, Figure 53 ) and pull the
valve seat (B) from the carburetor body.
16. Remove the pilot jet (
Figure 54 ).
17. Remove the starter jet ( Figure 55 ) and spacer.
18. Remove the main jet ( Figure 56 ).
19. Remove the jet holder ( Figure 57 ) and O-ring.
20. Insert a finger into the carburetor venturi, press
the needle jet toward the float bowl and remove it
(
Figure 58 ).
CAUTION
When cleaning a carburetor, do not
adjust the pilot screw setting. Chang
ing this setting will decrease engine
performance.
21. If necessary, remove the pilot screw as de-
scribed in
Pilot Screw in this chapter.
22. Clean and inspect the components as described
in this section.
Assembly
1. If the pilot screw was removed, install it as de-
scribed in
Pilot Screw in this chapter.
2. Install the needle jet (
Figure 58
) so the concave
side goes into the carburetor body.
3. Install the needle jet holder (
Figure 57 ) with a
new O-ring and install the main jet ( Figure 56 ).
4. Install the starter jet (
Figure 55
) and spacer.
5. Install the pilot jet ( Figure 54 ).
6. Install the valve seat into the carburetor body
(
Figure 59
). Secure it in place with the screw (A,
Figure 53
).
7. Hook the needle valve onto the tang on the float.
Install the float so the needle valve (A,
Figure 52 )
seats in the valve seat (B).
218 CHAPTER EIGHT
52
53
54
55
56