Xerox WorkCentre 7300 Series Скачать руководство пользователя страница 23

Страница: 23 / 203

Exiting the Port Settings Menu and returning to the Device's Tools tab screen

To exit the Port Settings menu, returning to the Tools tab screen, press the rectangular

Close

button in

the upper right corner of the Port Settings menu screen.

Wait several seconds and the Auto Clear service should log you out.

Note: If you changed any settings in the Port Settings menu, the Device will automatically reboot to
register and enable your new settings.

Configuring SNMP Community Names with Internet Services

Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press

Enter

Click the

Properties

Tab.

Click the plus symbol (+) to the left of the

Connectivity

, then the

Protocols

file folder.

Select

SNMP Configuration

in the directory tree, and check the

Enable

box for the version desired.

Click the

Edit Properties

button and supply the User Name (default of 11111) and Password (default

of x-admin), if prompted.

Enter a name for the

Community Name (Read-Only)

. This is the password for SNMP GET requests

from the SNMP Manager to the Agent in the Device.

Enter a name for the

Community Name (Read-Write)

. This is the password for SNMP SET requests

from the SNMP Manager to the Agent in the Device.

Caution: If you change the GET and/or SET Community Names, you must also change the names in
all network applications that are communicating by SNMP with this Device.

Enter a name for the

Community Name (Trap Notification)

. This is the default password for SNMP

TRAPS sent from the device to the Manager by SNMP.

Optionally enter the System Administrator's name for packet identification purposes.

10. Select a trap and click

Edit

in the Trap Notification Settings section.

11. Select your transport method (IPX or UDP) and fill in the trap destination information for your selected

method.

12. Select the event(s) that you wish to report on by checking the applicable box(es).

13. Click

Apply

to accept the changes, or

Undo

to return the settings to their previous values.

Note: Changes to settings will not be applied until you restart the Device.

Содержание WorkCentre 7300 Series












































































































































































































Результаты поиска

Содержание WorkCentre 7300 Series

Отзывы:

Похожие инструкции для WorkCentre 7300 Series

Бренды по названию

Популярные бренды

Xerox WorkCentre 7300 Series, Руководство администратора

Результаты поиска

Содержание WorkCentre 7300 Series

Отзывы:

Похожие инструкции для WorkCentre 7300 Series

Бренды по названию

Популярные бренды