82
Create a Mailbox
The machine has 200 mailboxes available.
A mailbox must be created before you can use Remote Mailbox or route received documents into
mailboxes (using the File Destination / Output Destination settings). Mailbox Fax Receive or Private Polling
documents are stored in the Mailbox. This is also convenient for differentiating between received
documents and documents to be transmitted (such as by Private Polling).
1.
Press the
Log In / Out
button to enter System Administration Mode.
2.
On the keypad enter [11111] or the current password. Touch
Enter
when finished.
3.
Press the
Machine Status button
on the Control Panel.
4.
Touch the
Tools tab
.
5.
Select
Setup & Calibration
.
6.
Touch
Mailbox
.
7.
Select an unassigned Mailbox number from the displayed list.
8.
Touch
Create/Delete
.
a.
Check Passcode – Select On or Off, then touch
Save
. Note that it is recommended that you select
On, then provide a password, to secure access to your Mailbox.
b.
Mailbox Name – Enter a name, then touch
Save
.
c.
Check Passcode – the selections below are viewable when On is selected.
•
Save (Write) - A password is required in selecting a mailbox.
•
Print/Delete (Read) - A password is required to print and delete mailbox documents.
•
Always (All Operations) - A password is required for both operations described above.
d.
Delete Documents After Retrieval:
•
No - Saves documents in Mailbox.
•
Yes - Deletes documents from Mailbox.
e.
Delete Documents with Expiration Date:
•
No – Continues to save documents in Mailbox.
•
Yes – Documents will be deleted from Mailbox after expiration date.
f.
Link Job Flow Sheet to Mailbox: Select this option, then touch Change Settings to link a Job Flow
Sheet to this Mailbox. The Job Flow Sheet routes incoming jobs to other destinations specified on
the Job Flow Sheet. To create a new Job Flow Sheet, to link to an existing Mailbox, touch
Create/
Change Link
. Note:
For full information on the use of Job Flow Sheets, refer to
Setup and Use of
Job Flow Sheets with Mailboxes
in the Options section of this guide.
9.
When complete, touch
Close
until the Tools tab screen is displayed.
10. To exit the Tools tab screen, wait several seconds for the Auto Clear service to log you out.
Содержание WorkCentre 7300 Series
Страница 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Страница 12: ...x ...
Страница 203: ......
