38
NetBIOS over IP Client/Server Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the
CD-ROMs that came with your Device. They are also typically available for downloading in self-
extracting Zip file format from the Internet at www.xerox.com.
2.
Print a
Configuration Report
as stated under the
Network Connectivity Tab
of this guide.
3.
On the Configuration Report,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as
one of the supported protocols. To enable "SMB," if required, follow the procedure stated under the
Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed from the
Network
Connectivity Tab
of this guide.
4.
The Workstation Print Driver Installation Procedures below ASSUME that you have already Set Up a
Server to Queue Jobs to the Printer. If you have NOT already set up a Server, for a quick-step set up
procedure, refer to the instructions supplied under the selection "Microsoft (NetBIOS over IP)," located
in the
NOS Selection
menu, under the
Network Connectivity Tab
of this guide.
Windows 2000 & XP Professional Workstation Print Driver Installation
Verify that the Correct Protocols and Services are installed in the workstation
1.
Verify that the
Internet protocol (TCP/IP)
is installed in the Workstation. On the Windows 2000
Desktop, right mouse click the
My Network Places
icon and select
Properties
. Right mouse click on
the
Local Area Connection
icon and select
Properties
. On the Windows XP desktop, click
Start
,
Control Panel
, and double click
Network Connections
. Right mouse click on the
Local Area
Connection
icon and select
Properties
. Verify that the
Internet Protocol (TCP/IP)
has been loaded.
If it has, click on (highlight) this item with your mouse and click the
Properties
button to verify that this
workstation is using either a dynamic or static method to obtain a valid TCP/IP address. Also verify
that this workstation is using a
DNS (or WINS) Server
for resolution of the NetBIOS Host name
(typically the same name as the computer's Internet host name). If the TCP/IP protocol is NOT loaded,
click the
Install…
button, then select
Protocol
as the type of network component that you wish to
install. Click the
Add…
button and select
Internet Protocol (TCP/IP)
. With your Operating System
Installer Disk readily available, click the
Have Disk…
button and follow any remaining instructions.
2.
Verify that the
Client for Microsoft Networks
is installed in the Workstation. On the Windows 2000
Desktop, right mouse click the
My Network Places
icon and select
Properties
. Right mouse click on
the
Local Area Connection
icon and select
Properties
. On the Windows XP desktop, click
Start
,
Control Panel
, and double click
Network Connections
. Right mouse click on the
Local Area
Connection
icon and select
Properties
. If the Client for Microsoft Networks is NOT loaded, click the
Install…
button, then select
Client
as the type of network component that you wish to install. Click the
Add…
button and select
Client for Microsoft Networks
. With your Operating System Installer Disk
readily available, click the
Have Disk…
button and follow any remaining instructions.
Содержание WorkCentre 7300 Series
Страница 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Страница 12: ...x ...
Страница 203: ......
