Xerox WorkCentre 7300 Series, Руководство администратора

Страница: 86 / 203

74
Configure a Fax Filing Repository using SMB
Installation Checklist
1. Following the fax server software manufacturer's instructions, create a shared folder on the fax server
to be used as a scan filing location (repository) for scanned documents. Write down the Share Name
of the folder and the Computer Name or Server Name.
2. Create a user account (login name) and password for the machine on the server. Make sure that the
machine has full access rights to the scan directory. Write down the user account (login name) and
password.
3. If allowed by the fax server software manufacturer, test the settings by attempting to connect to the
shared folder from another PC by logging in with the user account and password. Create a new folder
within the directory and then delete the folder. If you cannot perform this function check the user
account access rights and Share setup. Note that you can also simply wait until you have finished
setting up device to server communications, as stated in this section, then send a fax to the server to
test the communications setup.
Enter the Fax Repository Details via Internet Services
4. At your workstation, open your Web browser and enter the IP address of the machine in the Address
or Location field. Press
Enter .
5. Click the Properties tab.
6. Click the Services folder.
7. Click on the Fax folder.
8. Click on Fax Repository Setup and select SMB for Protocol.
9. Enter an IP Address or Host (NetBIOS) Name.
10. Enter 139 for Port Number.
11. Enter the Share name.
12. For Document Path, type in the name of the folder on the server that has been set up to receive device
scans. Do not use back slashes.
13. Supply the Login Name and Password for the machine to log into the fax server.
14. Re-enter the password in the Retype Password box.
15. Click Apply .
16. Enter the administrator User Name and Password and click OK. The default is 11111 and x-admin.