Xerox WorkCentre 7300 Series Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 203

background image

118

9.

If you wish to allow guest access, enter your guest password twice in the boxes provided.

10. Click

Apply

and enter the Administrator User name and password when prompted.

11. Click the

Reboot Machine

button, then

OK

, when prompted.

12. Refresh your web browser, then click on the

User Details Setup

link to set the Store User Details

setting. Note that you can set either NVM or hard disk as the destination for saved authentication
information. User Details Setup also allows you to configure the characteristics of the login prompt for
User Authentication.

Configure communications between the Accounting server and the device

Refer to the remote Accounting server manufacturer's documentation for the specific procedures to follow
to configure communications between the server and the multifunction device.

The server will contact the device based upon Accounting service parameters set up at the server, such as
the device's IP address and polling frequency.

Required network communications and server settings will be stated by the server's manufacturer.

Sample list of set up requirements for Equitrac's Accounting service

•

Enable TCP/IP and HTTP on the multifunction device.

•

Set up a static or reserved DHCP IP address for the device.

•

Enable TCP/IP port 80 communications at the device.

•

Download the Controller Interface for Xerox from the Equitrac™ web site.

•

Install the Controller Interface for Xerox at the server.

•

Verify that you have purchased a license for the Controller Interface for Xerox, as well as a license for
each device communicating with the server.

•

Register each multifunction device at the server (using the device's IP address for identification).

Enable the Accounting option in workstation print drivers

Use the Windows Add Printer dialogs to add the multifunction device's print driver to individual, networked
workstations. For instructions, if needed, refer to the Print Drivers section of this guide.

In the print driver default setting dialogs, locate and then enable the Accounting option. This step assures
that print jobs from individual workstations will be recognized by the authentication system, rather than
being unrecognized and deleted by the multifunction device.

For Windows operating systems, the default setting dialogs are accessed by right mouse clicking on the
printer's icon in the Printers window for Windows 2000, or the Printers and Faxes window for Windows XP.
Select

Properties

from the displayed menu, then locate and enable the Accounting option.

«
...
128
129
130
131
132
...
»

Содержание WorkCentre 7300 Series












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WorkCentre 7300 Series

Бренд: Canon Страницы: 358

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 858

Бренд: NCR Страницы: 2

Бренд: SPRT Страницы: 21

Бренд: Kyocera Страницы: 392

Бренд: Monarch Страницы: 8

Бренд: Oki Страницы: 64

Бренд: Oki Страницы: 78

imageRUNNER ADVANCE DX 717 Series

Бренд: Canon Страницы: 98

Oce VarioPrint 6000 Ultra+ Series

Бренд: Canon Страницы: 56

Бренд: Canon Страницы: 188

imageRUNNER ADVANCE C356iF III

Бренд: Canon Страницы: 96

Бренд: Canon Страницы: 218

WorkForce Pro WF-C8190DTWC

Бренд: Epson Страницы: 162

WorkForce Pro WP-4095 DN

Бренд: Epson Страницы: 2

WorkForce Pro WP-4532

Бренд: Epson Страницы: 4

WorkForce Pro WP-4530

Бренд: Epson Страницы: 287

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды