Xerox WorkCentre 7300 Series, Руководство администратора

Страница: 90 / 203

78
8. Touch Change Settings , make the desired changes, then touch Save .
9. Touch Close until the Tools tab screen is displayed.
10. Wait several seconds for the Auto Clear service to log you out.
Color Mode, Resolution, File Format, and File Name
Note that when using Server Fax, these features are set to fixed values which cannot be changed. The
setting for Color Mode is Monochrome. The setting for Resolution is Fine, and the setting for File Format is
TIFF. In addition, the Server Fax feature also automatically assigns file names.
Fax
Fax Overview
FP
The optional Fax feature works much the same as a standard facsimile machine. Extra features , covered
in this section, such as the Address Book, Group Dial, Comments, and the use of Mailboxes, are
meant to provide additional capabilities in support of the Fax feature.
Note: It is assumed that you purchased the appropriate 1 or 3 line Fax hardware kit for use with your
Device. If you did not, contact your Xerox Representative to purchase this option.
Checking and Setting Critical Fax Parameters
Refer to the Fax Settings Topic (including Fax Defaults and Fax Control) in this section to determine if
Fax Defaults and Fax Control parameters are correctly set for your environment.
Before You Start Fax
Before starting the setup:
• You cannot use this machine with a call waiting service.
• A facsimile located close to a main unit of a cordless phone can cause distorted images or interrupted
transmission. This machine should be installed at least five meters away from the main unit of the
cordless phone.
• If the digital line leased for your company network is multiplexed, facsimile communication may be
restricted as follows:
The features using our unique transmission method, such as Recipient Print Sets, Relay Broadcast
and Remote Mailbox, are not available.
The transmission speed is limited.
Super G3 cannot be used.