manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Руководство администратора, Страница: 28 / 203

Поделиться
Скачать
Xerox WorkCentre 7300 Series Скачать руководство пользователя страница 28

16

8.

In the 

Addresses to Bypass Proxy Server

 box, enter in up to 1024 characters of IP addresses, fully 

qualified host names, or wildcard host names (such as *.eng), separated by semicolons.  Functioning 
like the local address exception list in a typical web browser, these addresses will be permitted to 
bypass the Proxy Server.

9.

For the 

HTTP or HTTPS Server Names

, provide a name of up to 255 characters in length for one or 

both of these Proxy Servers.  A fully qualified domain name or IP address can be used.  Note:

 

Make 

sure that DNS is enabled as stated in the TCP/IP Protocol Configuration topic in the NOS Selection 
section of this guide.

10. Leave the Port Number set to 8080 (the IANA recognized proxy port) unless you are using a different 

port number.

11. Click 

Apply

 and supply the administrator User Name and Password, if prompted.  The default is 11111 

and x-admin.

12. If necessary to see the list of Registration hot links again, click your browser Back button.

13. Click 

Register with Xerox Communication Server

 to register this device with the Xerox 

Communication Server (Edge Host), which enables the automatic billing meter reading service. After 
registration, the device will poll the Edge Host routinely, and send meter readings only in response to 
requests from the Edge Host.

14. Place a check mark in the 

Request Registration

 box and 

Server Communication

 box.  Note that 

you can now schedule Xerox Communication Server polling time.  Make sure to check the server 
communication Enabled box.

15. Click 

Apply

 and supply the administrator User Name and Password, if prompted.

16. If necessary, use your browser Back button again, then click on 

Setup E-mail Notification

 to send 

billing meter (or supplies data) read notifications to the locally designated Administrator.

17. Enter the e-mail address of the designated Administrator in the box(es) supplied.

18. Place a check mark in the boxes associated with the type of notifications you wish to have e-mailed.

19. Click 

Apply

 and supply the administrator User Name and Password, if prompted. The default is 11111 

and x-admin.

20. Click on the Meter Assistant or Supplies Assistant links at any time to see the status of your 

communications.

Machine Software Upgrades

To upgrade, you must first obtain the upgrade software and then install it.

Prepare for the upgrade

It is important to obtain the correct upgrade file for your machine. Determine the software version you are 
currently running, as follows:

1.

Open your web browser and enter http:// and the TCP/IP address of the machine in the Address or 
Location field, then press [Enter].

2.

Click the [Properties] tab.

3.

Click the [General Setup] folder.

4.

Click [Configuration].

5.

Scroll down to the Software section to see your System Software version. Write down the version 
number. Note whether whether the Controller ROM is listed as Controller ROM or Cont PS 
ROM. This will determine which file to download from Xerox.com.

Содержание WorkCentre 7300 Series












































































































































































































Отзывы:

Нет отзывов