Xerox WorkCentre 7300 Series, Руководство администратора

Страница: 27 / 203

15
12. To remove a service screen button:
a. Touch the service that you want to remove (for instance, Internet Fax).
b. Touch [Not Assigned].
c. Touch [Save].
The screen refreshes and returns to the All Services screen.
d. Touch [Save] again.
The screen refreshes and returns to the Screen / Button Settings screen.
13. Touch [Close].
14. Touch [Log In/Out] button.
15. Touch [Logout].
Rearrange Icons
You can also use this feature to rearrange the icons. The service listed as #1 will be at the top left of the All
Services screen, #2 will be to the right of it, and so on.
Smart eSolutions (Meter Assistant and Supplies
Assistant)
Select this feature in Internet Services to access and set up automatic billing meter reading and automatic
machine supplies reporting. Note that this feature may currently be available only in the U.S.A.
Note: Additional Smart eSolutions information and procedures may be found on xerox.com. Look there
to ensure that you have the most complete and up to date information available.
Information Checklist
Make sure that you have an account on Xerox.com. Add all devices in inventory that you wish to register
for Automatic Meter Readings to your account. This is supported by Dallas eSupport 888-998-9922.
TCP/IP and HTTP protocols must be enabled on the device so that the device web browser can be
accessed (for Device Direct registration, described in this procedure).
To use the optional Smart eSolutions Windows Client or CentreWare Web, you will need to enable SNMP
as stated in this guide. For full information on these applications, visit www.xerox.com/smartesolutions.
At Your Workstation
1. Open your Web Browser and enter the TCP/IP address of the machine in the Address or Location field
and press
Enter .
2. Click the Properties tab.
3. Click the symbol to the left of General Setup .
4. Click the symbol to the left of Smart eSolutions .
5. Click Registration .
6. Click Enable Proxy Server . Note: If your network does not require a Proxy Server, you can skip to
step 13 below. You will, however, need to have DNS settings enabled (see TCP/IP Protocol
Configuration in this guide).
7. Place a check mark in the Use Proxy Server box.