8
Print Mode
1.
On the Parallel Port selections menu, press the selection line labeled
Print Mode
.
2.
Press the
Change Settings
button.
3.
On the settings screen, note which one of the displayed buttons is highlighted as the current setting for
Parallel Print Mode. This setting informs the Controller of the Page Description Language (PDL) being
used by your print jobs. The available settings are Auto (default), PostScript, HP-GL/2, PCL, and
TIFF.
Auto
enables the Controller to automatically detect and select the appropriate PDL.
4.
To change settings, press your selection of choice, then click the
Save
button on the touch screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
PJL (Printer Job Language) Setting
1.
On the Parallel Port selections menu, press the selection line labeled
PJL
.
2.
Press the
Change Settings
button.
3.
On the settings screen, note which of the two buttons is highlighted as the current setting for Job
Control Language. This is the setting that enables the Controller's job processing parameters to be
modified by HP PJL. The available settings are Enabled or Disabled.
4.
To change settings, press your setting of choice, then click the
Save
button on the touch screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Auto Eject time (Parallel Port Timeout)
1.
On the Parallel Port selections menu, press the selection line labeled
Auto Eject Time
.
2.
Press the
Change Settings
button.
3.
On the settings screen, note the current display in seconds for the Parallel Port Timeout. This is the
length of time that the Controller will wait for an end of job command before printing the current job. Up
and down selection arrows are provided for modification of the timeout value in the increments shown.
4.
To change settings, use the up or down selection arrow, then click the
Save
button on the touch
screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Bi-Directional Communications
1.
Select the down arrow on the screen to see this setting.
2.
On the Parallel Port selections menu, press the selection line labeled
Bi-directional
communications
.
3.
Press the
Change Settings
button.
4.
On the settings screen, note which of the two buttons is highlighted as the current setting for Bi-
Directional Communications. The available settings are Enabled or Disabled. To support high speed,
bi-directional parallel communications, select the Enabled setting.
5.
To change settings, press your setting of choice, then click the
Save
button on the touch screen.
6.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Содержание WorkCentre 7300 Series
Страница 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Страница 12: ...x ...
Страница 203: ......
