WTI PollCat NetLink Скачать руководство пользователя страница 61

Страница: 61 / 256

Pager ID Numbers:

The pager ID numbers that are used

when this alarm generates an alphanumeric page.

SNMP Manager:

The SNMP Manager(s) that will receive

SNMP Traps generated by this alarm.

Output Contacts:

NetLink can open or close the optional

Output Contacts when a PBX Inactivity Alarm is generated.

A "C" indicates the contact will be closed, an "O" indicates

the contact will be opened, a dash (-) indicates that the

status of the contact will not be changed.

Message:

The message sent when this PBX Inactivity

Alarm generates a callout, alphanumeric page, SNMP Trap,

or console action.

Auto Execute:

If enabled, NetLink will execute a user-

defined command string when a callout or console action is

generated.

Execute Commands:

The NetLink command string that

will be performed when Auto Execute is enabled, and a

callout or console action is generated by this alarm.

6-11

Status Screens

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 61 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: