WTI PollCat NetLink Скачать руководство пользователя страница 143

Страница: 143 / 256

15.1.2. Setting the Partition

The following events will cause NetLink to set a data partition:

Menu-Driven Read Session:

When the Buffer Functions

menu is used to release data, a partition will be set for the

port that initiated the read session. This partition will

include all data selected by the Read Session Parameters

menu. For more information, please refer to Section 15.2.

Command Driven Read Session:

When command ^B01 is

invoked, a partition will be set for the port that initiated the

command. This partition will include all data specified by

the ^B01 command arguments. For more information,

please refer to Section 15.3.

Set Partition Function:

When the Set Partition function

(Buffer Functions Menu) is performed, a partition will be

set for the port that activated the function. This partition

will include all data currently specified by the Read Session

Parameters menu. If the Data Type and Source port have

not been selected, the partition will include all data by

default. For more information, please refer to Section 15.2.

Command ^B00:

When command ^B00 (Set Partition) is

invoked with the proper arguments, a partition will be set

for the port that invoked the command. This partition will

include all data specified by the ^B00 command arguments.

For more information, please refer to Section 15.3.1.

FTP Push:

When an FTP Push operation is in progress, a

partition will be set which will include all files that were

requested via the FTP Push Configuration menu. For more

information, please refer to Section 15.4.

FTP Server:

When the FTP Server function is being used

to retrieve files, a partition will be set which will include all

files requested by the FTP client (e.g. WS FTP). For more

information, please refer to Section 15.5.

Notes:

Partitions remain in effect until the partition owner

exits command mode, invokes one of the Partition

release commands, or sets a new partition.

Other ports are not allowed to access partitioned

data until the partition is released.

15-3

Buffer Functions (Polling)

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 143 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: