WTI PollCat NetLink, Руководство пользователя, Страница: 184 / 256

17.2. Telnet Pass-Through
The Telnet Pass-Through function allows Telnet users to
communicate directly with the devices connected to PBX Port A,
PBX Port B, the AUX Port, the Console Port, or the Modem Port.
All NetLink menu functions are disabled, and the only NetLink
command that will be recognized is ^B30 (Exit Pass-Through and
Disconnect Telnet Session). In addition, data can be sent using
either Standard Telnet Protocol or Raw Socket Mode.
When a Telnet connection is established, using the Telnet Pass-
through option, the following events will occur:
1. Upon connection, NetLink will send the "POLLCAT
NETLINK" message (and the site ID, if defined) and then
wait for a password.
2. If a valid password is entered, NetLink will send the
"READY" message, and will then allow communication
with the device connected to the specified port.
Port Numbers for Telnet Pass-Through Function
This function is activated when one of the following port numbers
is included in the Telnet connect command.
Standard Telnet Protocol:
Telnet
Port No. Function
2101 Pass-Through to PBX Port A
2102 Pass Through to PBX Port B
2103 Pass-Through to AUX Port
2104 Pass-Through to Console Port
2105 Pass-Through to Modem Port
Raw Socket Mode:
Telnet
Port No. Function
3101 Pass-Through to PBX Port A, Raw Socket
3102 Pass-Through to PBX Port B, Raw Socket
3103 Pass-Through to AUX Port, Raw Socket
3104 Pass-Through to Console Port, Raw Socket
3105 Pass-Through to Modem Port, Raw Socket
17-2
PollCat NetLink User's Guide