WTI PollCat NetLink, Руководство пользователя, Страница: 130 / 256

12.3. The Auto Execute Function
Both the Callout action and Console action allow NetLink to
automatically execute a user-defined command string. This
command string is usually employed to report system status or
download data to the polling device.
The Auto Execute command consists of a string of ^Bxx
Commands, which are listed in Section 18 of this User's Guide.
Note that when the Auto-Execute string is defined, commands are
entered without the ^B character, and each individual command is
separated by a backslash followed by a forward slash character.
Example 1: To display system status and then download all stored
alarm records, the Auto Execute string would be defined as
follows:
\/16\/01,ALM
Where:
16 Indicates ^B16 (Display System Status).
01,ALM Indicates ^B01,ALM (Download all Alarm
Records).
Example 2: To Display the Site ID message, display the reason
for the Callout or Console action, and then download all alarm
records that matched a clue named "TEST", the Auto Execute
string would be defined as follows:
\/03\/18\/01,"TEST"
Where:
03 Indicates ^B03 (Send Site ID Message).
18 Indicates ^B18 (Display Reason for Callout or
Console Action).
01,"TEST" Indicates ^B01,"TEST" (Release Alarm Records
for the Alarm Clue Named "TEST").
12-6
PollCat NetLink User's Guide