WTI PollCat NetLink Скачать руководство пользователя страница 174

Страница: 174 / 256

16.1.2. Pass-Through Mode

The Pass-Through Mode allows direct communication with

device(s) connected to PBX Port A, PBX Port B, or the AUX Port.

When communicating via the Console Port or Network Port, the

Pass-through Mode also allows communication with the device

connected to the Modem Port.

Note:

While Pass-Through Mode is active, NetLink

will not store additional data, and will not check for

new records that match alarm clues.

To activate the Pass-Through Mode proceed as follows:

1. From the Main Menu, type

and press

[Enter]

to activate

the System Functions menu.

2. From the System Functions menu, type

and press

[Enter]

NetLink will prompt the user to specify a destination port.

Key in the number for the desired port and press

[Enter]

CAUTION:

Do not attempt to alter PBX

configuration unless you are authorized to do so.

Please refer to the PBX user's guide for further

instructions.

3. To exit Pass-Through Mode and return to Command Mode,

type

^B30

and press

[Enter]

16-2

PollCat NetLink User's Guide

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

Бренды по названию

Популярные бренды

WTI PollCat NetLink, Руководство пользователя

Результаты поиска

Содержание PollCat NetLink

Отзывы:

Бренды по названию

Популярные бренды