WTI PollCat NetLink страница 107 Скачать руководство пользователя

Страница: 107 / 256

Time:

Tells NetLink to determine the time each record is

received. The time is entered in "HH:MM" format, where

HH is the hour (00 - 23), and MM is the minute (00 - 59).

Day of the Week:

Tells NetLink to determine the day of

the week when the record is received. The day of the week

is entered as a single digit, where 1 = Sunday, 2 = Monday,

3 = Tuesday, 4 = Wednesday, 5 = Thursday, 6 = Friday, and

7 = Saturday.

Date:

Tells NetLink to determine the date the record is

received. The date is entered in "MM/DD" format, where

MM is the month (01 - 12) and DD is the date (01 - 31).

Example 1:

To create an Alarm Filter Clue that will count call

records received on Sunday, match parameters would be defined as

w=1

. Where

is the Real-Time variable for the day of the week,

and

indicates Sunday.

Example 2:

To create an Alarm Filter Clue that will count call

records received after 6:00 pm (18:00) or before 7:00 am (07:00),

match parameters would be defined as follows:

t>18:00+t<07:00

Where

is the Real-Time variable for the time of day, and

is the

logical OR operator.

Notes:

Real-Time variables are

not

defined in the Alarm

Filter Format.

The match parameter definition can include both

Real-Time variables and regular variables, as well

as logical and relational operators.

Real-Time variables function independently from

the Time/Date Stamp. The Time/Date Stamp does

not have to be enabled in order for the Real-Time

variables to function.

Values from the internal clock/calendar are not

included in the call record, unless the Time/Date

Stamp is enabled.

8-17

The Alarm Filters (Toll Fraud Detection)

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

Похожие инструкции для PollCat NetLink

Бренды по названию

Популярные бренды

WTI PollCat NetLink, Руководство пользователя

Результаты поиска

Содержание PollCat NetLink

Отзывы:

Похожие инструкции для PollCat NetLink

Бренды по названию

Популярные бренды