WTI PollCat NetLink Скачать руководство пользователя страница 60

Страница: 60 / 256

6.9.

PBX Inactivity Alarm Status Screens

These screens list parameters for the PBX Inactivity Alarms,

which notify the user when there is an interruption in the flow of

data from the PBX Ports. NetLink includes two separate PBX

Inactivity Alarms. Each alarm has its own status screen, which

lists the following parameters:

Schedule:

On/Off Status, Schedules, and Timers for the

Weekday and Weekend Alarms.

Exclusions:

Specific dates (such as holidays) when alarms

will be disabled.

Alarm Action Parameters:

Describes the action that will be

performed when this alarm is triggered.

Action:

The selected alarm action; None, Callout,

Alphanumeric Page, Numeric Page, SNMP Trap, Output

Contact, or Console action.

Phone Number:

The number dialed when the PBX

Inactivity Alarm generates a callout or page action.

6-10

PollCat NetLink User's Guide

PollCat NetLink

Version 3.22

05/08/2001 Tue 02:48 34% Full

PBX INACTIVITY ALARM 1:

SCHEDULE

ALARM ACTION PARAMETERS

Weekday Alarm:

Off

Alarm:

None

Weekday Schedule 1: 00:00-00:00

Phone #:

(undefined)

Weekday Timer 1:

00:00

(Cont.)

Weekday Schedule 2: 00:00-00:00

Pager ID 1:

(undefined)

Weekday Timer 2:

00:00

Pager ID 2:

(undefined)

Weekend Alarm:

Off

Pager ID 3:

(undefined)

Weekend Schedule 1: 00:00-00:00

SNMP Mgmt:

Manager #1

Weekend Timer 1:

00:00

Output Contacts

Weekend Schedule 2: 00:00-00:00

1/2/3/4:

-/-/-/-

Weekend Timer 2:

00:00

Message:

(undefined)

(Cont.):

EXCLUSIONS (MM/DD)

(Cont.):

--/-- --/-- --/-- --/--

Auto Execute:

Off

--/-- --/-- --/-- --/--

Execute Cmds:

(undefined)

--/-- --/-- --/-- --/--

(Cont.):

--/-- --/-- --/-- --/--

(Cont.)

--/-- --/-- --/-- --/--

(Cont.)

Press <ENTER> to return to menu ...

Figure 6.10: PBX Inactivity Alarm Status Screen (Alarm 1 Shown)

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 60 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: