WTI PollCat NetLink, Руководство пользователя

Страница: 133 / 256

Action Parameters:
11. Action: Defines the type of event that will occur according
to the schedule. The user may select None, Callout,
Alphanumeric Page, Numeric Page, SNMP Trap, Output
Contact, or Console.
12. Phone #: Defines the phone number that will be dialed for
a scheduled Callout or Page. This is the number for your
remote modem or pager service.
Note: For Numeric Paging only, this prompt can
specify both a pager phone number and a numeric
"message". In this case, the phone number is entered
using the following format:
" PHONENO@MESSAGENO# "
Where " PHONENO " is the pager number, and " MESSAGENO "
is any number which will notify the user that a scheduled
page has occurred. For example, to dial 555-1212 and send
the message "999", the phone number would be defined as
" 5551212@999# ".
13. Pager ID 1: The first Pager ID Number used when a
scheduled alphanumeric page is performed. NetLink will
dial up to three pagers for each schedule.
14. Pager ID 2: The second Pager ID for this schedule.
15. Pager ID 3: The third Pager ID for this schedule.
16. SNMP Mgmt: The SNMP Manager(s) that will receive
SNMP Traps generated by this schedule. This prompt can
select Manager 1, Manager 2, or both. Note that IP
addresses for each SNMP Manager are defined via the
Network Port Configuration menu.
17. Output Contacts: (Optional) When an Output Contact
action is scheduled, this prompt selects the Open/Close
operation for the optional Output Contacts. An "O"
indicates that the corresponding contact will be opened as
scheduled, a "C" indicates the contact will be closed, a dash
(-) indicates that the status of the contact will not be
changed.
13-3
Scheduled Actions