WTI PollCat NetLink, Руководство пользователя

Страница: 168 / 256

15.5.3. File Names for the FTP Server Function
When your FTP program connects to the NetLink unit, it will
display a series of file names. Each file name denotes the type of
data stored in the corresponding file. The file names generated by
the FTP server function are based on the user-selected basic file
name, the source port that collected the data, and the data type. As
shown in the example in Figure 15.8, the file name will consist of
the following components.
Note: This file naming convention applies only to
the FTP Server function. A different convention is
used when data is transferred using FTP Push. For
more information, please refer to Section 15.4.1.
À
File Name (Up to Four Characters): The base file name
that is defined via item number 3 in the FTP Server
Configuration menu. If the file name is not defined,
NetLink will use the first three characters of the Site ID
message. If the Site ID message has not been defined,
NetLink will use the letters "PNL". Note that if the defined
file name is less than four characters long, then NetLink
will not use the remaining characters in this field.
Á
Source Port (One Character): NetLink will enter one
character to indicate the port which originally received this
data; the letter "A" indicates PBX Port A, "B" indicates
PBX Port B, and "X" indicates the AUX Port. Note that
files created by the FTP Server Function will only contain
data from one input port.
Â
Data Type (Two Characters): The selected Data Type
(File Type). NetLink will list one of three different data
types: ST indicates that the file contains Standard (Non-
Alarm) data, A1 indicates that the file contains records that
matched Alarm Filter 1, and A2 indicates that the file
contains records that matched Alarm Filter 2.
15-28
PollCat NetLink User's Guide
Figure 15.8: FTP Server File Names