WTI PollCat NetLink Скачать руководство пользователя страница 55

Страница: 55 / 256

6.4.

Scheduled Action Status Screens

This screen lists parameters for the Scheduled Action feature,

which allows the NetLink to perform an action (such as a page, or

SNMP Trap) according to a user-defined schedule. There are two

separate Action Schedules. Section 13 describes the procedure for

defining these schedules. This screen includes the following:

Schedule:

The currently defined action schedule. The

scheduled action time is listed next to the day. Days that are

not included are listed as "OFF".

Exclusions:

Specific dates (such as holidays) when the

schedule will be automatically disabled.

Action Parameters:

Describes the action performed

according to this schedule.

Action:

The scheduled action; None, Callout,

Alphanumeric Page, Numeric Page, SNMP Trap, Output

Contact, or Console action.

Phone Number:

The number dialed for a scheduled

callout or page.

Pager ID Numbers:

The ID numbers that are used for a

scheduled alphanumeric page.

6-5

Status Screens

PollCat NetLink

Version 3.22

05/08/2001 Tue 10:12 34% Full

SCHEDULED CALLOUT/ACTION 1:

SCHEDULE

ACTION PARAMETERS

Scheduled Action:

Off

Action:

None

Sunday:

Off

Phone #:

(undefined)

Monday:

Off

(Cont.):

Tuesday:

Off

Pager ID 1:

(undefined)

Wednesday:

Off

Pager ID 2:

(undefined)

Thursday:

Off

Pager ID 3:

(undefined)

Friday:

Off

SNMP Mgmt:

Manager #1

Saturday:

Off

Output Contacts

1/2/3/4:

-/-/-/-

EXCLUSION (MM/DD)

Message:

(undefined)

--/--

(Cont.):

--/--

(Cont.):

--/--

Auto Execute:

Off

--/--

Execute Cmds:

(undefined)

--/--

(Cont.):

Press <ENTER> to return to menu ...

Figure 6.5: Scheduled Action Status Screen (Schedule 1 Shown)

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 55 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: