WTI PollCat NetLink Скачать руководство пользователя страница 189

Страница: 189 / 256

17.5. Multiple Telnet Connections

When the Telnet Pass-Through Mode, Real Time Read Mode, or

Selective Read Mode are active, additional telnet connections will

be allowed in some cases and denied in others as described below:

Telnet Pass-Through Mode:

When the Telnet Pass-

Through Mode is connected to the target Port (PBX Port A,

PBX Port B, or the AUX Port), additional telnet

connections will be allowed or denied as follows:

Real Time Mode:

not

allowed to connect to the

target port.

Selective Read Mode:

allowed

to connect to the

target Port.

Real Time Mode:

When the Telnet Real Time Mode is

connected to the target port (PBX Port A, PBX Port B, or

the AUX Port), additional telnet connections to the target

port will be denied.

Selective Read Mode:

When the Selective Read Mode is

connected to the target port (PBX Port A, PBX Port B, or

the AUX Port), additional telnet connections will be

allowed or denied as follows:

Pass Through Mode:

allowed

to connect to the

target port.

Real Time Read Mode:

not

allowed to connect to the

target port.

17-7

TCP Port Options

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 189 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: