WTI PollCat NetLink Скачать руководство пользователя страница 150

Страница: 150 / 256

15.3.1. Command

B00 (Set/Release Partition)

Command ^B00 can be used to set or release the partition prior to

beginning command driven data release.

Notes:

If the ^B00 command line does not include an

argument, the partition will be set to include all

data by default.

Although the ^B00 command line can include both

the Data Type and Source Port arguments, the

Release partition argument (

) cannot be combined

with another argument.

Command ^B00 uses the following format:

^B00[,type][,source]

^B00,R

Where:

,type

Data Type:

Offers the following options:

,STD

(Standard Data) Records that did

not

match an Alarm Filter Clue.

,A1

Records that matched a Clue for

Alarm Filter 1.

,A2

Records that matched a Clue for

Alarm Filter 2.

,ALM

Records that matched Alarm Filter 1

and

records that matched Alarm Filter 2.

(Not Specified) Include all data types.

,source

Source Port:

Offers the following options:

,PA

Records received via PBX Port A.

,PB

Records received via PBX Port B.

,PX

Records received via AUX Port.

(Not Specified) Records received from any of the three

input ports.

Release Partition:

Release the current data partition. Cannot be combined

with other ^B00 arguments.

Examples:

^B00,D

Set partition to include all records that did not

match an Alarm Clue, regardless of the Input

Port that received them.

^B00,A1,PX

Set partition to include records that matched

Alarm Filter 1, and were received via the

AUX Port.

^B00,R

Release the current data partition.

15-10

PollCat NetLink User's Guide

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 150 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: