WTI PollCat NetLink Скачать руководство пользователя страница 56

Страница: 56 / 256

SNMP Manager:

The SNMP Manager(s) that will receive

SNMP Traps generated by this schedule.

Output Contacts:

The scheduled Output Contact action. A

"C" indicates the contact will be closed, an "O" indicates

the contact will be opened, and a dash (-) indicates that the

status of the contact will not be changed.

Message:

The message sent when a scheduled callout,

alphanumeric page, SNMP Trap, or console port action is

performed.

Auto Execute:

If enabled, NetLink will execute a user-

defined command string when a scheduled callout or

console action is performed.

Execute Commands:

The command string that will be

performed when the Auto Execute feature is enabled, and a

scheduled callout or console action is generated.

6.5.

Dialback Security Status Screen

This screen (Figure 6.6) lists parameters for the Dialback Security

feature. The Status Screen shows the On/Off status of the

Dialback feature, and lists phone numbers each password.

Dialback Security is defined and enabled using the Modem Port

Configuration menu as described in Section 4.4.4.

6-6

PollCat NetLink User's Guide

PollCat NetLink

Version 3.22

05/08/2001 Tue 10:30 34% Full

DIALBACK SECURITY:

Dialback Security:

Off

Supervisor

Dialback Phone #:

(undefined)

User 1

Dialback Phone #:

(undefined)

User 2

Dialback Phone #:

(undefined)

Press <ENTER> to return to menu ...

Figure 6.6: Dialback Security Status Screen

Содержание PollCat NetLink

































































































































































































































































Результаты поиска

Содержание PollCat NetLink

Отзывы:

WTI PollCat NetLink, Руководство пользователя, Страница: 56 / 256

Результаты поиска

Содержание PollCat NetLink

Отзывы: