WTI PollCat NetLink, Руководство пользователя

Страница: 164 / 256

15.5.2. Retrieving Data Using FTP Server
Since NetLink's FTP Server feature will function with a variety of
different FTP client programs (e.g. DOS FTP, WS FTP, etc.), the
exact procedure will differ slightly depending on the FTP client
used. Although this section describes the general concept for
transferring data using the DOS FTP client, note that the general
concept can also be applied to other FTP clients.
Note: When the FTP Server feature is used to
retrieve data, records cannot be selected according to
the alarm clue matched.
1. From the DOS prompt at your remote PC, type
FTP ipaddress and press [Enter] (where ipaddress
is the IP address that is assigned to the NetLink unit). Note
that the NetLink's IP address is set using the Network
Parameters menu as described in Section 4.4.5.
2. The FTP Server (NetLink) will acknowledge that a
connection has been made, and that the NetLink FTP server
is ready. The FTP client will then prompt you to enter your
user name. Key in your user name and then press [Enter] .
Note that the user name is defined using the FTP Server
Configuration menu as described in Section 15.5.1.
3. If the valid user name is entered, the FTP Server will return
a message which indicates that the user name was accepted.
The DOS FTP client will then prompt you to enter your
password. Key in your password and press [Enter] . Note
that the password is defined using the FTP Server
Configuration menu as described in Section 15.5.1.
4. If the valid password is entered, the FTP Server will return
a message which indicates that the login was accepted, and
the FTP client will display the "FTP>" prompt.
Note: NetLink will allow three attempts to enter a
correct user name or password.
15-24
PollCat NetLink User's Guide