Part Number:
350092
Issue: 3
Page 83 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
Open the machine door.
Insert the formatted machine USB memory stick into the USB port.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ AUDIT’ sub-menu select “LOAD INTO MACHINE” and press
3L
.
The display will show all available configuration files thus
SELECT FILE
►A0000001.TXT
A0000002.TXT
Use scroll buttons
1
or
2
to pick the appropriate file to load into the machine.
Press button
3L
to accept the chosen file.
The display will show:
LOAD INTO MACHINE
FILE: - A0000001.TXT
ACCEPT OR CANCEL?
Press button
3L
to accept will cause the display to show:
LOAD INTO MACHINE
FILE: - A0000001.TXT
LOADING…
When the audit upload is complete the machine will emit an audible beep and return to the
“LOAD/READ AUDIT” sub-menu.
Press cancel
3S
to exit back to ‘Door Open Mode’ to save settings to the VMC.
Switch
OFF
the machine.
Remove the USB memory stick.
Switch the machine
ON
and close the door.
Read Audit from Machine
A formatted USB memory stick will be required as described in section
15.
Open the machine door.
Insert the formatted machine USB memory stick into the USB port.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ AUDIT’ sub-menu select “READ FROM MACHINE” and press
3L
.
The display will show:
READ FROM MACHINE
►AUTO SELECT
SELECT FILE
