Westomatic H2O Hydration Station Azure Mk4, Техническое руководство

Страница: 77 / 125

Part Number: 350092 Issue: 3
Page 77 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.

Use buttons 1 or 2 to scroll to the output number setting.

Press 3L to enter and change the output number.

The LCD will flash the output setting 00. ( Maximum setting 200 )

Use buttons 1 or 2 to change the output number.

Press 3L to save the output setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
Note: Any changes to output number must be done with due care. Drink makeup and abnormal
machine functions may occur if selecting an incorrect output number.
13.6.4 ►FLAVOUR SHOT
The main water for the recipe refers to the throw times to fill a bottle with a juice shot.
└―――――► Drink Throws
└―――――► Flavour shot
└―――――► Cup not used ← Cup setting not used
└―――――► Cup not used ← Cup setting not used
└―――――► Bottle fill ← Juice throw to fill a bottle
└―――――► Delay ← Delay before the Juice starts
└―――――► Pulse On ← Syrup pulse on time
└―――――► Pulse Off ← Syrup pulse off time
└―――――► Output number ← Syrup output circuit number
13.6.4.1 Bottle fill
This setting defines the time the flavour pump runs.

Use buttons 1 or 2 to scroll to the Bottle fill setting.

Press 3L to enter and change the throw time.

The LCD will flash the time setting 00.0. ( Maximum time 60.0s )

Use buttons 1 or 2 to change the time.

Press 3L to save the time setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
13.6.4.2 Delay
This setting defines the start delay time of the juice pump.

Use buttons 1 or 2 to scroll to the delay setting.

Press 3L to enter and change the start delay time.

The LCD will flash the time setting 00.0. ( Maximum time 60.0s )

Use buttons 1 or 2 to change the time.

Press 3L to save the time setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
13.6.4.3 Pulse ON / OFF
This setting defines the on and off duration for the juice. Should it be necessary to pulse the
juice throw follow the set up procedure below.

Use buttons 1 or 2 to scroll to either the Pulse on or Pulse off setting.

Press 3L to enter and change the pulse time.

The LCD will flash the time setting 00.0. ( Maximum time 25.0s )

Use buttons 1 or 2 to change the time.