Westomatic H2O Hydration Station Azure Mk4, Техническое руководство

Страница: 13 / 125

Part Number: 350092 Issue: 3
Page 13 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
6 Safety
6.1 General safety precautions

This vending machine must never be cleaned using a water jet.

This document is intended for use as a reference book for qualified installation engineers.

Installation and service activity, including replacement of the mains cable, on this vending
machine should only be undertaken by a competent person who is fully conversant with
the potential dangers of working on live electrical equipment and mains pressure water.

It is recommended that any person undertaking installation and/or service activity on this
vending machine has previously attended a Westomatic Master Class training course
specific to this machine.

In order to ensure reliable machine operation and ensure safe working practices, the user
manual and associated Operator Instructions must be stored inside the document holder
located within the vending machine and be accessible to all staff involved in the machine
installation, operation, maintenance and cleaning at any time.

Place the machine on a firm flat surface and ensure that it’s level.
6.2 During installation

Extension cables or longer mains leads must not be used to power this vending machine.

This machine is supplied with a new water hose. Do not reuse an existing water hose.

The mains lead should be kept away from hot surfaces and sharp edges.

Precautions should always be taken by using insulated tools and insulated probes on test
equipment. HSE Guidance Notes 38 provides guidance on the selection of suitable test
probes, leads, lamps, voltage indicating devices and other measurement equipment used
by electricians when working on or investigating power circuits.
6.3 During normal operation

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do not tilt or climb on the machine.

Check the machine regularly for leaks and cleanliness.
6.4 During maintenance or repairs

Prior to any service activity, switch off and isolate the water and electrical supply. If in
doubt refer to BS7671 for safe isolation procedures.

Servicing of live equipment must never be undertaken.

There are no user serviceable parts within the hydration station.

Do not make modifications or alterations to the H
2
O water machine, and not to use the
water machine for any other purpose for which it has been designed.

Never look at the exposed UV lamp while in operation and never touch the UV tube on
annual replacement.

Your H
2
O water machine must be cleaned and sanitised on a regular basis to maintain
drink quality reliability and remove bacteria and contaminants from the water system.

The machine dispenses drinks for human consumption, so the highest standards of
hygiene are to be adhered to within the process area at all times.