Westomatic H2O Hydration Station Azure Mk4, Техническое руководство

Страница: 76 / 125

Part Number: 350092 Issue: 3
Page 76 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
13.6.3 ►MAIN WATER
The main water for the recipe refers to the throw times to fill a bottle with water.
└―――――► Drink Throws
└―――――► Main Water
└―――――► Cup not used ← Cup setting not used
└―――――► Cup not used ← Cup setting not used
└―――――► Bottle fill ← Water throw time
└―――――► Delay ← Delay before the water starts
└―――――► Pulse On ← Pulse on time
└―――――► Pulse Off ← Pulse off time
└―――――► Output number ← Output circuit number
13.6.3.1 Bottle fill
This setting defines the time the main water valve is open.

Use buttons 1 or 2 to scroll to the Bottle fill setting.

Press 3L to enter and change the throw time.

The LCD will flash the time setting 00.0. ( Maximum time 60.0s )

Use buttons 1 or 2 to change the time.

Press 3L to save the time setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
13.6.3.2 Delay
This setting defines the start delay time of the main water valve opening.

Use buttons 1 or 2 to scroll to the delay setting.

Press 3L to enter and change the start delay time.

The LCD will flash the time setting 00.0. ( Maximum time 60.0s )

Use buttons 1 or 2 to change the time.

Press 3L to save the time setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
13.6.3.3 Pulse ON / OFF
This setting defines the on and off duration for the main water valve. Should it be necessary to
pulse the syrup throw follow the set-up procedure below.

Use buttons 1 or 2 to scroll to either the Pulse on or Pulse off setting.

Press 3L to enter and change the pulse time.

The LCD will flash the time setting 00.0. ( Maximum time 25.0s )

Use buttons 1 or 2 to change the time.

Press 3L to save the time setting.

Press cancel ( 3S ) to exit back into ‘Door Open Mode’ to ensure the new settings are saved
to the machine VMC.
13.6.3.4 Output number
This setting determines the output used on the VMC. This is factory set and there is no need to
change the output from the default setting.