![Westomatic H2O Hydration Station Azure Mk4 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/westomatic/h2o-hydration-station-azure-mk4/h2o-hydration-station-azure-mk4_technical-manual_965985014.webp)
Part Number:
350092
Issue: 3
Page 14 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
6.5 Safety devices
6.5.1
Door service switch
Opening the door changes the state of the machine from vend
mode to service mode. Pulling the door switch will trick the
machine into believing that the machine door is closed. This
feature is useful to check the internal components while in
VEND MODE.
The machine will be operated as if the door has
been closed and bottles and payments must be used to
operate the machine.
6.5.2
On / Off switch
The on / off switch on the fuse and distribution box puts the
machine in the on or off state. The machine may still hold
charge so before performing any maintenance remove the
mains cable from the wall socket.
6.5.3
Waste bucket full switch
The waste bucket float switch [A] must always remain in the
bucket, when the level of fluid in the waste bucket reaches the
float switch the machine will shut down. The bucket full switch
is outside the software control as an emergency stop safety
device. The waste full can only be reset by emptying the waste
bucket and cycling the power to the machine.
6.5.4
Bottle sensor
A bottle sensor [B] detects the presence of a bottle before
delivering a drink. In the event the bottle is removed the recipe
is stopped to prevent spillage and wastage.
The vend will not begin unless a bottle is in the correct position
in the bottle station, the blue LCD display will display a
message that a bottle has been detected.
A
B