Part Number:
350092
Issue: 3
Page 57 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
Host via MDB USD 2
X
Host via MDB USD 3
X
Use buttons
1
or
2
to highlight the ‘CARD/COIN MECH’ option and press
3L
to accept.
The disabled (
X
) and enabled (
) displays for any given menu option are mutually
exclusive. This means that if a menu option is already enabled but a different, currently
disabled option needs to be enabled instead, it will first be necessary to highlight the
desired disabled option using either of the two scroll buttons
1
or
2
and press
3L
to accept
the setting.
The display to the right of the chosen option will start to flash.
Using either of the two buttons
1
or
2
toggle the chosen option to the enabled condition (
)
and press
3L
to accept the setting.
The original enabled option will then automatically revert to the disabled condition and the
display to the right of the chosen option will now be enabled and stop flashing.
Press cancel
3S
to exit back into ‘Door Open Mode’ to save setting to the VMC.
Host via MDB USD 1 ,2 ,3
This menu will allow the user to set the machine to use a
payment system of another MDB enabled vending
machine. Up to 3 machines can be hosted from one
payment system. Each H
2
O connected to another
payment system must have its own separate USD
address
To set the machine to use Host from another
machine, from the ‘PAYMENT SETTINGS’ sub-
menu use buttons
1
or
2
to highlight “PAYMENT
SYSTEM” and press enter
3L
.
The display will show:
PAYMENT SYSTEM
► Free Vend
Card / Coin Mech
X
Host via MDB USD 1
X
Host via MDB USD 2
X
Host via MDB USD 3
X
Use buttons
1
or
2
to highlight the USD address required and press button
3L
to accept.
The disabled (
X
) and enabled (
) displays for any given menu option are mutually
exclusive. This means that if a menu option is already enabled but a different, currently
disabled option needs to be enabled instead, it will first be necessary to highlight the
desired disabled option using either of the two scroll buttons
1
or
2
and press
3L
to accept
the setting.
The display to the right of the chosen option will start to flash.
Using buttons
1
or
2
to toggle the chosen option to the enabled condition (
) and press
3L
to accept the setting.
The original enabled option will then automatically revert to the disabled condition and the
display to the right of the chosen option will now be enabled and stop flashing.
Press cancel
3S
to exit back into ‘Door Open Mode’ to save settings to the VMC.
