Westomatic H2O Hydration Station Azure Mk4, Техническое руководство

Страница: 73 / 125

Part Number: 350092 Issue: 3
Page 73 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.

Press cancel 3S to exit back into ‘Door Open Mode’ to save setting to the VMC.
13.5.1.2 Extra time
This function is used to add extra time to the end of a vend, this function can be used to allow
final drips to enter the cup and not into the cup station.

Use buttons 1 or 2 to scroll to the “Extra Time” menu. Press 3L to enter the sub menu.

The LCD will flash the extra time setting 00s.

Use buttons 1 or 2 to change the extra time. (Maximum time of 60s)

Press 3L to save the extra time setting.

Press cancel 3S to exit back into ‘Door Open Mode’ to save settings to the VMC.
13.5.1.3 Push-and-Hold bottle fill.
Bottle filled drinks can be used in one of two ways.
“Push-And-Hold” is not enabled (X) in the drink setup menu.
With this function off ( X ), the bottle fill button when pressed will deliver the amount of water as
set in the drink throw menu.
“Push-And-Hold” is enabled (

) in the drink setup menu.
With this function on (  ), the bottle fill button when pressed will deliver water only while the
button is pressed. The machine will only dispense up to the maximum amount of water as set in
the drink throw menu.
13.5.1.4 Force own bottle
This function is used to enable (

) or disable ( X ) the machine to only allow users to use their
own bottle. By default, this function is active as no cup droppers are fitted.
13.5.2 ►DRINK THROWS
All recipe selections have the same menu parameters to set up a recipe so for clarity only one
drink option will be shown.
13.5.3 ►MAIN WATER
The main water for the hydration station refers to the throw times to fill a bottle with water.
└―――――► Drink Throws
└―――――► Main Water
└―――――► Cup not used ← Cup setting not used
└―――――► Cup not used ← Cup setting not used
└―――――► Bottle fill ← Water throw time
└―――――► Delay ← Delay before the water starts
└―――――► Pulse On ← Pulse on time
└―――――► Pulse Off ← Pulse off time
└―――――► Output number ← Output circuit number
13.5.3.1 Bottle fill
This setting defines the time the main water valve is open.

Use buttons 1 or 2 to scroll to the Bottle fill setting.

Press 3L to enter and change the throw time.