![Westomatic H2O Hydration Station Azure Mk4 Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/westomatic/h2o-hydration-station-azure-mk4/h2o-hydration-station-azure-mk4_technical-manual_965985034.webp)
Part Number:
350092
Issue: 3
Page 34 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
A message on the display will inform the user that the drink option has run out and to select
another drink.
After selecting the "Flavour ? Replaced" message with the
3L
Button the LCD will display
the following message:
RESET JUICE COUNTER
ACCEPT/CANCEL
Pressing
3L
to accept re-sets the Juice counter to zero after you have confirmed your
choice in the next display message
RESET JUICE COUNTER
ARE YOU SURE?
The machine will emit an audible beep and return to the “DOOR OPEN MODE”.
Press cancel
3S
at any time to exit back into ‘Door Open Mode’ and cancel the counter
reset.
The setting of the juice counter values can be found in Service mode under the JUICE SETUP
sub menu.
► SERVICE MODE <Enter Access Code>
└►
MACHINE SETTINGS
└►
JUICE SETUP
└►
Juice 1 Empty
← Vends in juice box
└►
Juice 2 Empty
← Vends in juice box
└►
Juice 3 Empty
← Vends in juice box
12.4
►
UV Filter change
The Hydration station is equipped with a two-stage water filtration process. Stage one is the
water filter to remove solid contaminants, stage two is the UV treatment to remove 99.99%
bacteria from the water. The UV water treatment uses a visible UV lamp that has a working life
determined by drink counts. When enabled in the miscellaneous menu using any value greater
than 0, this option will be displayed in Door Open mode. When the UV filter is changed the
operator must press button
3L
over the UV Filter change option to inform the software that the
filter has been changed. Failure to do so will result in the machine stopping all vends once the
counter has reached the vend count.
►
SERVICE MODE <Enter Access Code>
└►
MACHINE SETTINGS
└►
Miscellaneous
└►
MDB Timeout
← MDB Timeout
└►
Master timeout
← Water valve timeout
└►
Water Filter
← Water filter counter
└►
UV Filter
← UV Filter counter
└►
Enable sounder
← Turn sounder on / off
A soon as the first vend takes place the UV filter changed option is displayed. If the operator
changes the UV tube you must ensure that the “UV filter changed” has been selected via buttons
1
and
2
and then press button
3L
to reset the counter. The following message will be displayed.
UV FILTER CHANGED
ACCEPT/CANCEL
Pressing
3L
will confirm the UV filter has been changed and reset the counter to 0.