Part Number:
350092
Issue: 3
Page 42 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
13.2.1.4
Date
This function allows the user to change the displayed date. The date is used to record the date
of the fault in the fault log also see Time above.
To change the date setting use buttons
1
or
2
to highlight the ’Date’ display and press
3L
.
The “year” digits will start to flash. Pressing the appropriate buttons
1
or
2
will change the
display to the desired year setting press button
3L
to save this setting and move onto the
“month” and then “day”.
Pressing button
3L
to accept and save the settings and stop the data flashing.
13.2.1.5
Default Clock
This function allows the user to default the machine time and date displays back to zero.
To change the date setting use scroll buttons
1
or
2
to highlight the ’Default Clock’ display
and press button
3L
to accept after which the display will show:
DEFAULT CLOCK
ACCEPT/CANCEL
Pressing
3L
to accept re-sets the time and date displays to zero.
The machine will emit an audible beep and return to the “DEFAULT CLOCK” display.
Press cancel button
3S
to exit back into ‘Door Open Mode’ to ensure the new settings are
saved to the machine VMC.
13.2.1.6
Daylight Saving
When enabled (
), this option automatically changes the time on the machine according to
British Summer Time rules.
X
= BST inactive
= Automatic set up on the last Sunday of March / October
13.2.1.7
Site ID
The Site ID is a tracking number that can be assigned to all machines located on the same site
and if assigned, will appear in the machine audit data thereby enabling collation of data for
machines from the same site. Site ID’s have to be numeric and can be up to 6 digits long.
To assign a site ID use scroll buttons
1
or
2
to highlight the ’Site ID’ display and press
3L
to accept.
The site ID digits will start to flash.
Pressing the appropriate buttons
1
or
2
to change the display to the desired ID setting.
Pressing button
3L
to accept sets the site ID display and stops it flashing.
Press cancel
3S
to exit back into ‘Door Open Mode’ to ensure the new settings are saved
to the machine VMC.
13.2.1.8
Asset Number
The machine asset number is a machine reference number that can be used by customers to
create databases of their machine stock. This is especially useful for keeping track of machine
service records etc. Asset numbers must be numeric and can be up to 8 digits long
To assign an asset number use buttons
1
or
2
to highlight the ’Asset No’ and press
3L
.
The asset number digits will start to flash.
Pressing the appropriate buttons
1
or
2
to change the display to the desired ID setting.
