Part Number:
350092
Issue: 3
Page 81 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ CONFIG’ sub-menu select “LOAD INTO MACHINE” and press
3L
.
The display will show all available configuration files thus
SELECT FILE
►AZUR_XYZ.CFG
Use scroll buttons
1
or
2
to pick the appropriate file to load into the machine.
Press enter
3L
to accept the chosen file.
The display will show:
LOAD INTO MACHINE
FILE: - AZUR_XYZ.CFG
ACCEPT OR CANCEL?
Press button
3L
to accept will cause the display to show:
LOAD INTO MACHINE
FILE: - AZUR_XYZ.CFG
LOADING…
When the config upload is complete the machine will emit an audible beep and return to
the “LOAD/READ CONFIG” sub-menu.
Press cancel
3S
to exit back to ‘Door Open Mode’ to save settings to the VMC.
Switch
OFF
the machine.
Remove the USB memory stick.
Switch the machine back
ON
and close the door.
Read Config from Machine
A formatted USB memory stick will be required as described in
section 15.
Open the machine door.
Insert the formatted machine USB memory stick into the USB port.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ CONFIG’ sub-menu select “READ FROM MACHINE” and press
3L
.
The display will show:
READ FROM MACHINE
► AUTO SELECT
SELECT FILE
Selecting “AUTO SELECT” by pressing button
3L
will cause the machine to automatically
create a new, sequential config filename which when read/saved to the USB memory stick
will contain all the config settings present on the machine at the time of saving.
If “AUTO SELECT” is confirmed, the display will show:
READ FROM MACHINE
FILE: - AZUR_XYZ.CFG
