Part Number:
350092
Issue: 3
Page 44 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
From time to time it will be necessary to change machine configuration settings and either save
them to a USB memory stick for future reference or to transfer these settings to other machines.
The information below describes how to load configurations into machines and how to read
existing machine configuration data onto a USB memory stick.
Load Into Machine
A formatted USB memory stick will be required as described in
section 15.
Open the machine door.
Insert the formatted USB memory stick into the USB port.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ CONFIG’ sub-menu select “LOAD INTO MACHINE” and press
3L
.
The display will show all available configuration files thus
SELECT FILE
►AZUR_XYZ.CFG
Use scroll buttons
1
or
2
to pick the appropriate file to load into the machine.
Press enter
3L
to accept the chosen file.
The display will show:
LOAD INTO MACHINE
FILE: - AZUR_XYZ.CFG
ACCEPT OR CANCEL?
Pressing
3L
to accept will cause the display to show:
LOAD INTO MACHINE
FILE: - AZUR_XYZ.CFG
LOADING…
When the config upload is complete the machine will emit an audible beep and return to
the “LOAD/READ CONFIG” sub-menu.
Press cancel
3S
to exit back to ‘Door Open Mode’ to ensure the new settings are saved to
the machine VMC.
Switch
OFF
the machine.
Remove the USB memory stick.
Switch the machine
ON
and close the door.
Read from Machine
A formatted USB memory stick will be required as described in
section 15.
Open the machine door.
Insert the formatted USB memory stick into the USB port.
The machine will recognise the insertion of the USB memory stick by beeping twice.
From ‘LOAD/READ CONFIG’ sub-menu select “READ FROM MACHINE” and press
3L
.
The display will show:
