![Westomatic H2O Hydration Station Azure Mk4 Скачать руководство пользователя страница 60](http://html1.mh-extra.com/html/westomatic/h2o-hydration-station-azure-mk4/h2o-hydration-station-azure-mk4_technical-manual_965985060.webp)
Part Number:
350092
Issue: 3
Page 60 of 125
© Copyright Westomatic Vending Services Limited 2020
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electrical, mechanical, photocopying, recording or otherwise, without prior permission from Westomatic Vending
Services Limited.
►
SERVICE MODE <Enter 4-digit access code>
└
►
MACHINE SETTINGS
└
►DIAGNOSTICS
This will allow the user to test the machine outputs to check that motor and water valves are
functioning correctly. A fault log captures all faults on the machine with a time and date stamp.
When in the ‘Diagnostics’ menu use buttons
1
or
2
to scroll through the available selections and
select an option with the enter button
3L
. The Diagnostics menu contains the following functions.
13.2.6.1
Display / Clear fault log.
Use buttons
1
or
2
to scroll to the Display or Clear fault log menu option. Press
3L
to enter the
sub menu.
Display fault log will display all the faults on the machine since the last time the log had been
cleared. This menu can help in finding faults in the machine as all circuit numbers, which created
the fault, can be traced back. Selecting the clear fault log will reset the log to zero.
13.2.6.2
Reset audit
From the ‘Diagnostic’ sub-menu select “RESET AUDIT LOG” and press enter
3L
.
The display will show:
RESET AUDIT LOG
ACCEPT/CANCEL
Pressing button
3L
to accept will cause the display to show:
RESET AUDIT LOG
ARE YOU SURE?
The machine will emit an audible beep and return to the “DIAGNOSTIC MENU”.
Press cancel
3S
at any time to exit back into ‘Door Open Mode’ and cancel the counter reset.
13.2.6.3
Last drink code / button
The machine has a read only display of the last drink code and the last drink button pressed.
This information can help with diagnostics.
13.2.6.4
Triac Testing
From the ‘Diagnostic’ sub-menu select “TRIAC TESTING” and press enter
3L
.
The display will show:
TRIAC TESTING
001
Press button
3L
and the display will show the triac selection numbers.