Wacker Neuson BS 50-4s, BS 50-4As, Руководство по ремонту

Страница: 45 / 194

wc_tx004029gb_FM10.fm
45
Rammer Disassembly and Reassembly
4.3 Draining the Ramming System Oil—BS60 and BS70
Requirements
■
Approved container for drained oil
Background Lubricating oil is distributed throughout the ramming system by the action of the
rammer. Holes drilled in the piston carry oil from the bottom of the rammer to the
crankcase as the rammer operates. Oil in the ramming system must be maintained
at the correct level to ensure the ramming system operates efficiently.
Procedure Perform the procedure below to drain the ramming system oil.
1. Tilt the rammer backward until it is resting on the handle.
2. Place a suitable container under the drain plug and remove the drain plug (a) .
Note: It may take up to 10 minutes for the oil to drain.
3. Re-install the drain plug and torque it to 54 Nm (40 ft.lbs.).
Note: Dispose of oil in accordance with local environmental regulations.
Result The ramming system oil has now been drained.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
wc_gr012862
a