Wacker Neuson BS 50-4s, BS 50-4As, Руководство по ремонту

Страница: 144 / 194

wc_tx004029gb_FM10.fm
144
Rammer Disassembly and Reassembly
Continued from the previous page.
2. Install the oil pump to the machine using three screws (c) . Torque the screws to
9.5 Nm (7 ft.lbs.).
3. With a syringe (n) connected to one end of the output oil hose (b) , set the other
end into a source of 2-cycle engine oil (p) . Then, draw the oil from the source
into the output oil hose. Fill the output oil hose with oil.
4. Connect the output hose (b) using the clamp (a) . Connect the other end of the
output hose to the carburetor adapter when installing the engine.
5. Install the engine. See topic Installing the Engine—WM80.
6. Fill the oil tank with 2-cycle engine oil.
t
Result The oil pump has now been installed.
b
a
wc_gr012855
c
c
wc_gr012897
n
p
b