wc_tx004063gb_FM10.fm
33
Rammer
Troubleshooting
3.4
Testing the Ignition Module and Checking the Spark
Requirements
■
Ignition tester P/N 5000078836
■
Engine removed
Procedure
Perform the procedure below to test the ignition module/check the spark.
1. Preset the gap of the ignition tester
(a)
to 4.2 mm (0.166 in.).
2. Attach the end of the ignition cable to one end of the tester.
3. Ground the other end of the tester by clipping it onto the engine cylinder.
4. Crank the engine using the rewind starter.
Note:
A minimum of 500 rpm is required to produce spark.
Does the spark jump the test gap?
Result
The ignition module/spark has now been tested.
Yes ____
No ____
The ignition system is OK.
The ignition system is malfunctioning.
Replace the ignition module.
wc_gr012941
a
4.2 mm
0.166 in.
Содержание BS 50-4s, BS 50-4As
