Wacker Neuson 2503 Скачать руководство пользователя

Страница: 87 / 280

OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm

3-27

Operation

3.15 Special instructions for machine travel on public roads

The machine is subject to the:

•Applicable legal regulations of your country

Also observe the applicable regulations for accident prevention of your country.

3.16 Starting machine travel

Information!

The machine will not move off unless the control lever on the left is lowered.

After starting the engine:

☞

The alternator charge indicator light goes out

☞

Press the accelerator pedal slowly

➥

Machine travel starts

3.17 Drive levers

DANGER

Accident hazard due to incorrectly rotated upper carriage!

If rotated incorrectly, the upper carriage blocks the visibility of the travel path.

☞

Before starting machine travel on a construction site, align the upper car-
riage so that the operator has an unrestricted view of the travel path.

DANGER
Accident hazard! The machine moves in the opposite direc-
tion if the upper carriage is rotated by 180°!

Causes serious injury or death

•

Slowly and carefully actuate the drive levers/pedals.

The stabilizer blade side is the front side.
Raise the bucket and the stabilizer blade.
The machine can be moved either with the drive levers or with the pedals. Lock the upper
carriage when traveling over longer distances.

Fig. 95: Drive lever/accelerator pedal

Position

Function

1
2

Push forward
Push forward

Track excavator moves forward

3
4

Pull backward
Pull backward

Track excavator moves backward

3
2

Pull backward
Push forward

Track excavator turns to the left

1
4

Push forward
Pull backward

Track excavator turns to the right

Содержание 2503

























































































































































































































































































Результаты поиска

Содержание 2503

Отзывы:

Похожие инструкции для 2503

Бренды по названию

Популярные бренды

Wacker Neuson 2503, Руководство оператора

Результаты поиска

Содержание 2503

Отзывы:

Похожие инструкции для 2503

Бренды по названию

Популярные бренды