manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 209 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 209

OM 25-3503 us – Edition 4.1 * 2503_3503b530.fm

5-27

Maintenance

Threaded fittings and attachments

All threaded fittings must be checked regularly for tightness, even if they are not listed in 
the maintenance schedules.

☞

Engine fastening screws

☞

Fastening screws on the hydraulic system

☞

Line, bucket teeth and pin fastenings on the attachment

Retighten loose connections immediately. Contact a Wacker Neuson service center if nec-
essary.

Pivots and hinges

All mechanical pivot points on the machine (for example door hinges, joints) and fittings 
(for example door arresters) must be lubricated regularly, even if they are not listed in the 
lubrication plan.

5.14 Lubrication points

Lubricate the lubrication points with the green caps once a week.
Lubricate the lubrication points with the blue caps daily.

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов