manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 180 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 180

4-6

OM 25-3503 us – Edition 4.1 * * 2503_3503b410.fm

Malfunctions

Engine error messages

Information!

The drive is throttled at cold oil temperatures. Warm up the machine to operat-
ing temperature.

Observe the following if an error is displayed in the multifunctional display:

•Machine travel or operation is prohibited in case of major errors
•Engine power is reduced.
•The traveling drive is disabled.
•Stop and park the machine.
•Contact a Wacker Neuson service center and have the malfunction rectified.

Machine travel and operation is possible in case of minor errors.

•Engine power is not reduced.
•The traveling drive is throttled.
•Contact a Wacker Neuson service center and have the malfunction rectified.

Information!

Possible errors are displayed in the multifunctional display for a few seconds 
when the machine is started.

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов