Wacker Neuson 2503 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 280

Wacker Neuson 2503 Скачать руководство пользователя страница 101

OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm

3-41

Operation

Protective FOPS structure/canopy – category I (option)

DANGER

Crushing hazard! Falling objects.

Causes serious injury or death.

☞

Install a protective FOPS structure in areas with danger of falling objects.

☞

Machine operation is prohibited without a protective FOPS structure.

Information!

The protective FOPS structure corresponds to category I according to ISO
3449:1992.
• The machine owner must ensure that the hazard situation is evaluated and that

the national regulations are observed.

• The machine owner must ensure that only work is performed that does not

require any higher protection.

• Accidents cannot be fully avoided despite equipping a machine with protective

structures.

Information!

Protective structures may only be installed or removed by a Wacker Neuson ser-
vice center.

«
...
99
100
101
102
103
...
»

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов