Wacker Neuson 2503, Руководство оператора, Страница: 86 / 280

3-26
OM 25-3503 us – Edition 4.1 * * 2503_3503b330.fm
Operation
Procedure
☞
Drive the jump-starting vehicle close enough to the machine so that the jump leads can
reach to connect the two batteries
☞
Let the engine of the jump-starting vehicle run
☞
First connect one end of the red jump lead ( + ) to the + terminal of the empty battery,
then connect the other end to the + terminal of the starting battery
☞
Connect one end of the black cable (
–
) to the
–
terminal of the starting battery
☞
Connect the other end of the black cable (
–
) to a solid metal component fimly screwed
on the engine block or onto the engine block itself. Do not connect it to the negative ter-
minal of the empty battery, as otherwise explosive gas emerging from the battery can
ignite if sparks are formed!
☞
Start the engine of the machine with the empty battery
Once the engine has started:
☞
With the engine running, disconnect both jump leads in exactly the reverse order (first
remove the
–
terminal, then the
+
terminal) – this prevents sparking near the battery!
12 V
12 V
34001b710_05.eps
Fig. 94: Starting aid with battery jumper cables
Empty battery
Starting
battery