Wacker Neuson 2503 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 280

Wacker Neuson 2503 Скачать руководство пользователя страница 2

Legend

Edition

Issued

4.1

01/2016

Copyright © 2015 Wacker Neuson Linz GmbH, Hörsching
Printed in Austria
All rights reserved, in particular the global copyright laws, right of reproduction and right of distribution.
No part of this publication may be reproduced, translated or used in any form or by any means – graphic, electronic or
mechanical including photocopying, recording, taping or information storage or retrieval systems – without prior per-
mission in writing from the manufacturer.
No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson
Linz GmbH.
Any violation of the legal provisions, in particular those relating to copyright protection, will lead to both civil and crimi-
nal prosecution.
Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their products.
For this reason, we may from time to time need to make changes to figures and descriptions in this documentation
which do not reflect products that have already been delivered and that will not be attached on these machines.
Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions not
accepted. Non-metric weights and measurements are approximate. Translation of original Operators´s Manual.
The cover features the machine with possible optional equipment.
Photographs and graphics are symbolic representations and may differ from the actual products.
Wacker Neuson is authorized to reprint the copyright-protected material contained in this publication,
belonging to Perkins Engines Company Ltd.
The Operator's Manual and any amendments to it must be constantly available at the place of use
of the vehicle. Possible amendments are included at the end of the Operator’s Manual.

Wacker Neuson Linz GmbH
Flughafenstr. 7
A-4063 Hörsching
Tel.: +43 (0) 7221/63000
E-mail: [email protected]
www.wackerneuson.com
Document:

OM 25-3503 us

Order no.:

1000255984

Edition:

4.1

Documentation

Title

Language

Order no.

Operator’s Manual

us

1000255984

Spare parts catalog

2503

de/en/fr

1000179989

3503

1000189534

«
1
2
3
4
...
»

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов