manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 48 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 48

2-8

OM 25-3503 us – Edition 4.1 * * 2503_3503b210_us.fm

Safety instructions

2.8

Operator Protection System

TOPS rollbar (up to serial no. AF01416) 
ROPS rollbar

The machine can be equipped with an optional lowerable TOPS or ROPS rollbar.

WARNUNG

DANGER

Personal injury hazard! In order to ensure the best possible 

protection for the operator, operate the machine only with a 

raised rollbar.

Risk of severe personal injury or death.

• Always fasten the seat belt if the rollbar is raised.

WARNUNG

WARNING

W

Personal injury hazard! Do not modify the rollbar.

Failure to follow this precautionary measure can lead to severe injury or death.

• No drilling, cutting or grinding.
• No welding, straightening or bending.
• Do not mount any brackets.
• Repair work may be performed by a Wacker Neuson dealer only.
• Always replace the complete rollbar if it is deformed, cracked or otherwise 

damaged.

• If you are not sure, always contact a Wacker Neuson dealer.

Traveling without TOPS rollbar (up to serial no. AF01416)
Traveling without ROPS rollbar

WARNUNG

DANGER

Accident hazard! Do not operate the machine with a lowered 

rollbar.

Failure to follow this precautionary measure will cause severe injury or death.

• Traveling with a lowered rollbar is temporarily allowed depending on the situa-

tion (e.g. to reduce the transport height in case of low clearance heights) – but 
only if the following conditions are fulfilled:

• Obtain the approval of the competent national authority.
• Machine travel is only allowed on absolutely level ground.
• Avoid tipping movements of the machine under all circumstances.
• Fastening the seat belt is not allowed.
• Wear protective equipment (e.g. protective clothing, safety glasses).

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов