manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 33 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 33

OM 25-3503 us – Edition 4.1 * 2503_3503b110.fm

1-21

Introduction

Description

This label describes the functions of the pedals and control levers (Operating Pattern A – 
ISO controls (Europe) and Operating Pattern A).
Check before starting the machine the operating pattern that has been chosen.

– see chapter 3.46

 Changeover valve for SAE/ISO controls (option)

 on page 3-77

Location

On the headliner.

Description

This label describes the functions of the pedals and control levers (Operating Pattern A – 
ISO controls (Europe) and Operating Pattern A).
Check before starting the machine the operating pattern that has been chosen.

– see chapter 3.46

 Changeover valve for SAE/ISO controls (option)

 on page 3-77

Location

On the headliner.

Description

Explains the joystick functions (operating pattern “B”/SAE).
Check before starting the machine the operating pattern that has been chosen!

– see chapter 3.46

 Changeover valve for SAE/ISO controls (option)

 on page 3-77

Position (option)

On the headliner.

Fig. 45: A/ISO operating pattern functions Tier IV

Fig. 46: A/ISO operating pattern functions Tier III

Fig. 47: Operating pattern B/SAE (option)

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов