Wacker Neuson 2503 Скачать руководство пользователя страница 152

Страница: 152 / 280

3-92

OM 25-3503 us – Edition 4.1 * * 2503_3503b340.fm

Operation

3.53 Hydraulic quickhitch (option)

• Attend specific training before putting into operation. Training must be given by

authorized technical personnel and must be understood by the operator.

• For safety reasons, the quickhitch must be operated with two control elements. This

avoids opening the quickhitch unintentionally during work operation.

• Both hitch claws must be clean before hitching.
• For more information, see

Easy Lock/Powertilt with Easy Lock

Operator’s Manual.

• Store the Operator’s Manual of the hydraulic quickhitch together with the Operator’s

Manual of the machine.

DANGER

Crushing hazard when picking up attachments!

If an attachment is not locked correctly, it can come off and cause serious
injury or death.

☞

Do not allow anyone to stay in the danger zone.

☞

Do not use damaged attachments.

☞

Check pin

must be fully retracted. Otherwise repeat the lock cycle until

check pin

is retracted.

☞

Ensure safe locking with a rapid succession of stick and bucket movements
as close as possible to the ground.

☞

Operate the machine only with a safely locked attachment.

DANGER

Crushing hazard when attachments are removed!

If an attachment is not locked correctly, it can tip over and cause serious injury
or death.

☞

Do not allow anyone to stay in the danger zone.

☞

Lower the attachment to level and firm ground ensuring stability.

DANGER

Injury hazard due to incorrect operation of the hydraulic quickhitch!

For system-specific reasons, the quickhitch can also be operated with other
hydraulic functions. This can cause serious injury or death

☞

Operate the hydraulic quickhitch only with the function

Raise stabilizer

blade

Содержание 2503

























































































































































































































































































Результаты поиска

Содержание 2503

Отзывы:

Wacker Neuson 2503, Руководство оператора, Страница: 152 / 280

Результаты поиска

Содержание 2503

Отзывы: