manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 20 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 20

1-8

OM 25-3503 us – Edition 4.1 * * 2503_3503b110.fm

Introduction

1.5 Regulations

Requirements to be met by the operator

Earth moving machines may be driven and serviced only by persons who meet the follow-
ing requirements:
• 18 years or older
• Physically and mentally suited for this work
• Persons have been instructed in driving and servicing the earth moving machine and 

have proven their qualifications to the contractor

• Persons are expected to perform work reliably.
They have been appointed by the contractor for driving and servicing the earth moving 
machine.
Observe the legal regulations of your country.

Warranty

Warranty claims can be made only if the conditions of warranty have been observed. They 
are included in the General Conditions of Sales and Delivery for new machines and spare 
parts sold by the dealers of Wacker Neuson Linz GmbH, Hörsching (Austria). Further-
more, the instructions in this Operator’s Manual must be observed.

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов