manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 78 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 78

3-18

OM 25-3503 us – Edition 4.1 * * 2503_3503b320.fm

Operation

Hour meter

Counts the engine operating hours with the engine running.

Maintenance meter

Counts the engine operating hours until the next maintenance.
The maintenance meter starts at 500.0 hours. It counts down to 0.0 hours. The wrench 
symbol then starts to flash.
The maintenance meter keeps on counting down (

í

0.1 hours, 

í

0.2 hours, etc.)

Information!

After 500 operating hours the output of the Tier IV diesel engine is reduced by 
25 % if maintenance is not performed.

Fuel level indicator

Indicates the remaining amount of fuel in the tank.
Refuel if the segments reach the low range.

Add fuel immediately if the highlighted symbol appears in the main menu.

Fig. 79:

Fig. 80:

Fig. 81:

Fig. 82:

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов